Home > Load Cells > WEIGHING_ASSEMBLIES

WEIGHING_ASSEMBLIES

Weigh Modules and Weighing Assemblies are used for tank weighing, hopper weighing, conveyor scales, scale conversion. Compression weigh modules are designed to be installed under the legs of tanks, mounting lugs, or support beams of a structure. The weight that is being measured compresses the weigh module’s load cell, causing a change in output signal.


9104 weighing assemblies

Products

Sort by: Product Price Default
  •  per page
ARTECH WM-I, SSWM-I SMALL TANK/HOPPER WEIGHING MODULE (250lb - 10000lb)
The WM-I Weighing Module is designed to utilize single ended shear beams for tank and hopper weighing. The module ia avaliable in either mild steel or stainless steel. The cell is loaded through a rod and spherical washer assembly that protects the cell from side load included errors caused by thermal expansion on the tank or hopper. The assembly is designed for use with the Artech 30310 and 30210CBM shear beams but can be provided to accommodate the Artech SS30510, which is a direct replacement for the HBM-BLC

Our price: $325.00
FOR MORE INFO OR QUOTE PLEASE CONTACT US:
SkypeAsk a question about this product
ARTECH WM-I, SSWM-I TANK WEIGHING MODULE KIT (3000lb - 40000lb)
The WM-I Weigh Module Kit Includes :

* 4 EA. WM-I Weight Modules*
* 1 EA. SB-I Load Cell J-Box
* 25 Ft. 4 Conductor, 22 GA. Shielded Cable
* Optional Weight Indicator
* 3 or 4 Modules Per Kit

Our price: $2095.00
FOR MORE INFO OR QUOTE PLEASE CONTACT US:
SkypeAsk a question about this product
ARTECH WM-II, SSWM-II TANK / HOPPER WEIGHING MODULE KIT (15Klb - 1000Klb)

The WM-II Weigh Module Kit Includes :

  • 4 EA. WM-II Weight Modules*
  • 1 EA. SB-I Load Cell J-Box
  • 25 Ft. 4 Conductor, 22 GA. Shielded Cable
  • Optional Weight Indicator

Our price: $2920.00
FOR MORE INFO OR QUOTE PLEASE CONTACT US:
SkypeAsk a question about this product
ARTECH WM-II, SSWM-II TANK/HOPPER WEIGHING MODULE (5Klb - 250Klb)
The WM-II Weighing Module is designed to utilize double ended shear beams for tank and hopper weighing. The module is avaliable in either mild steel or stainless steel. The cell is loaded through a collar assembly that "locks" the tank or hopper to the weigh module, thereby eliminating the need for check rods in most applications. The WM-II is designed for use with the Artech 70210 or SS70210 load cells, but can be provided to accommodate the Artech 70310, a direct replacement for the Sensortronics 65058.

Our price: $295.00
FOR MORE INFO OR QUOTE PLEASE CONTACT US:
SkypeAsk a question about this product
ARTECH WM-III TRUCK/TRACK WEIGHING MODULE (20000lb - 200000lb)
The WM-III Weighing Module is designed to utilize double ended shear beams for Truck and Track weighing. The weigh module is avalliable in mild steel or stainless steel. For capacities larger than 50K, Artech machined links are highly recommended. These links are manufactured from the same alloy steel as the load cells, which helps to minimize load cell wear and maximize the strength of the entire mount. The WM-III is designed for use with the stainless or tool steel versions of the 80210 or 80310 load cells.

Our price: $595.00
FOR MORE INFO OR QUOTE PLEASE CONTACT US:
SkypeAsk a question about this product
ARTECH WM-IV, SSWM-IV TANK / HOPPER WEIGHING MODULE (1000lb - 125000lb)
The WM - IV tank / hopper weigh module uses the 70510 double ended shear beam load cell. Available in steel or stainless steel. The WM - IV is ideal for small to medium capacity weighing applications

Our price: $150.00
FOR MORE INFO OR QUOTE PLEASE CONTACT US:
SkypeAsk a question about this product
ARTECH WM-VII, SSWM-VII TANK WEIGHING MODULE KIT (300lb - 80000lb)

The WM-VII Weigh Module Kit Includes :

  • 4 EA. WM-VII Weight Modules*
  • 1 EA. SB-I Load Cell J-Box
  • 25 Ft. 4 Conductor, 22 GA. Shielded Cable
  • Optional Weight Indicator

Our price: $1540.00
FOR MORE INFO OR QUOTE PLEASE CONTACT US:
SkypeAsk a question about this product
  •  per page
sale_balances
 
-->